Hello Paul,
In addition to above, kindly try below:
For the Domain User account that used to run the SIA,
In the windows Control Panel, go to
- user account
- then Change user account control settings
- and reduce the security level to Low - Never Notify
Please let us know the outcome.
- Mahesh
We have a set-up where we create item linked with cproject, cproject gets the role inherited from cproject template while item inherits from portfolio. Although we have a authorization synch config done. To modify the project structure and status or dated, we just want to give write authorization to user. But the issue is that cproject gets the role (with write autho) from cproject template , user can only display the project can't change anything on it. How can we achieve that user could change structure, the dates and status on tasks, just giving write autho on project.
Hi Prasoon,
Payment not yet done on these. In FBL1N, the accounting documents are in open items. So, user wants to cancel these accounting docs. But, I think it is not possible to cancel the acc. docs directly when they have created w.r.to invioce receipt. So that, I am trying to suggest him to cancel the invoice document...
Hello Everyone
We need to know under what circumstances the technical wage type /I01 gets generated ? Also what are the steps that need to be taken to prevent the same from getting generated?
With Regards
JP
did you try png image?
Click Actions> New folder
During consumption if stock is not in the correct storage type / storage bin defined in the control cycle then system stamps a negative Quant in storage type 914 and bin number (production order number) as per the movement type (261) setting.
Check the stock of storage type 914 you will find some negative Quant there. if negative Quant exist then use LT01 transaction to adjust the Quant in between the production storage bin and Storage type 914
Hi,
I have a requirement in order to store contractor data in HR environment. What would be the best way ? Store as employee within specific Employee Grouping or store as business partner ? Any ideas ?
Thanks a lot !
Storage type 901 is for production receipt.System create Quant in this bin the moment you book the production(movement type setting 103 in WM). Before clearing the bin my suggestion is to get a manual physical count done for the material in side the warehouse. Once yu are sure that there is a difference in between the book stock and physical stock then only perform the Physical count in the system using the WM transaction (LI01N-LI04-LI11N-LI20--LI21)
As mentioned by Jurgen for interim storage type physical counting can be done provided the customizing is in place
Con of this
From system perspective you are allowed to create the Physical inventory document however it is very difficult for the user to perform the inventory as physically you don't hv the bin marked in 901 area reason being during production receipt the Production order number becomes the bin number (As per movement type setting)
Hi Ameet,
Yes, even I wanted it to be incorrect but that is how system is behaving 
Please see below screenshots
Risks with MEDIUM risk level
Risks with HIGH risk level
Regards,
Madan.
HI Rakesh,
Thank you for the response.
I want to run Inter-company elimination. I have configured as per the How to guide, created Seller business rule and the IC Accounts but not getting an output. Had I got an error I could have investigated.
Seeking help to understand if someone faced a similar issue and its resolution.
Regards,
Rajat Gupta
I was using SAP.UI.COMMONS.<Elements> instead of SAP.M.<ELEMENTS>. Now its working fine.
Ashish,
thanks for your attention!
the the change log data of DSO2 :
| date(K) | plant(K) | storage location(K) | sold to(K) | material(K) | sale office(K) | delivery amount | Recordcode |
| 2014/5/4 | GD01 | ’0001 | 2012670 | ‘1000000000014 | 100 | 70 | N |
| 2014/5/4 | GD01 | ’0001 | 2012670 | ‘1000000000014 | 100 | -70 | R |
| 2014/5/4 | GD01 | ’0001 | 2012670 | ‘1000000000014 | 100 | 99.5 | N |
May be you didn't understand my question clearly. I have used the summation mode for Keyfigure (DSO1 to DSO2) ,and result data is wrong.The amount in DSO2 now is 99.5, but the correct data should be 149.5. And I guess the cause of this case may be the summation mode and Recordcode 'R' as I analyze above .
I want to know whether if some good ideas can solve the problem.
What I have done currently is to change the Recordcode 'R' to 'N' in the transformation rule (DSO1 to DSO2). This can get the correct data ,but will also generate redundant data.
thanks and regards
Sam
Hi Suresh
You cam use CostCenter Hierarchy in MDG with assignment to cost center in Muliple Object Processing. You can refer Change Request Processing for Single Objects and Multiple Objects
Dear RB
1.As per your suggestion, i restated my sap system with database
2. For me there is no chance to replace R3* files, because i was already in latest kernel version
SAP Kernel version is 741 patch 50
DBSL 741 48
R3load 741 48
3. After that continue system export preparation, i got below error message.
EXP # more R3load.exe.log
/usr/sap/SPS/DVEBMGS00/exe/R3load=>sapparam(1c): No Profile used.
/usr/sap/SPS/DVEBMGS00/exe/R3load=>sapparam: SAPSYSTEMNAME neither in Profile no
r in Commandline
/usr/sap/SPS/DVEBMGS00/exe/R3load: START OF LOG: 20140928091246
/usr/sap/SPS/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3loa
d/R3ldmain.c#11 $ SAP
/usr/sap/SPS/DVEBMGS00/exe/R3load: version R7.41/V1.9 [UNICODE]
Compiled Sep 2 2014 00:17:59
/usr/sap/SPS/DVEBMGS00/exe/R3load -testconnect
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.048) R3load stops in the dependency loop while creatin
g tasks (note 2044380)
DBSL patchinfo (patches.h): (0.048) DB6: Use of DB2 SMP Parallelism (INTRA_PARAL
LEL=YES) (note 2047006)
--------------------- End of patch information -------------------------
process id 29856
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SPS/DVEBMGS00/exe/R3load: job finished with 1 error(s)
(STAT) DATABASE times: 0.004/0.000/0.000 100.0%/0.0%/0.0% real/usr/sys.
/usr/sap/SPS/DVEBMGS00/exe/R3load: END OF LOG: 20140928091246
Please verify trans log, about SSFS
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [/bas/741_REL/src/krn/rsec/rsecssfs.c 1143]
4 ETW000 28 0.006288
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" opened for read [/bas/741_REL/src/krn/rsec/rsecssfs.c 4365]
4 ETW000 13990 0.020278
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 0 (message: <No message available>) [/bas/741_REL/src/krn/rsec/rsecssfs.c 1224]
4 ETW000 258 0.020536
4 ETW000 [ dev trc,00000] read_ssfs_record(): DB_CONNECT/DEFAULT_DB_USER read successfully from ssfs
4 ETW000 13 0.020549
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 8 0.020557
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 10 0.020567
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [/bas/741_REL/src/krn/rsec/rsecssfs.c 1143]
4 ETW000 14 0.020581
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" opened for read [/bas/741_REL/src/krn/rsec/rsecssfs.c 4365]
4 ETW000 57 0.020638
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 0 (message: <No message available>) [/bas/741_REL/src/krn/rsec/rsecssfs.c 1224]
4 ETW000 132 0.020770
4 ETW000 [ dev trc,00000] read_ssfs_record(): DB_CONNECT/DEFAULT_DB_PASSWORD read successfully from ssfs
4 ETW000 12 0.020782
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 7 0.020789
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 10 0.020799
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [/bas/741_REL/src/krn/rsec/rsecssfs.c 1143]
4 ETW000 14 0.020813
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" opened for read [/bas/741_REL/src/krn/rsec/rsecssfs.c 4365]
4 ETW000 47 0.020860
4 ETW000 [ dev trc,00000] RSecSSFs: SSFS-4215: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" exists, but does not contain the requested entry [/bas/741_REL/src/krn/rsec/rsecssfs.c 4395]
4 ETW000 49 0.020909
4 ETW000 [ dev trc,00000] RSecSSFs: SSFS-4218: Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage [/bas/741_REL/src/krn/rsec/rsecssfs.c 4405]
4 ETW000 19 0.020928
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: SSFS-4218: Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage <-- SSFS-4215: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" exists, but does not contain the requested entry) [/bas/741_REL/src/krn/rsec/rsecssfs.c 1224]
4 ETW000 32 0.020960
4 ETW000 [ dev trc,00000] read_ssfs_record(): not found is accepted, RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_CON_ENV)=1 : SSFS-4218: Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage <-- SSFS-4215: Data file "/usr/sap/SPS/SYS/global/security/rsecssfs/data/SSFS_SPS.DAT" exists, but does not contain the requested entry
4 ETW000 15 0.020975
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 7 0.020982
4 ETW000 [ dev trc,00000] -->DbSlConnect(vers=0, type=0, env='[default env]', usr='SAPSR3', kernel dbsl='741')
4 ETW000 46 0.021028
4 ETW000 [ dev trc,00000] Substitution of aliases T_nn (n=0...9) in SQL hints enabled. 25 0.021053
Please suggest me, if anything i am missing
Thanks
Regards
Sudhher k
+91 9741165077
Hi Rudiger,
Thanks for the reply. I have used another method and it's working fine now.
Right Click on Apache Tomcat->Press Clean. Solved my issue.
Regards,
Bhavin
Split buttons are essentially a command button with a split section for a drop list of actions. Very handy from grouping variations on the one action. A good example is the Open command button in Word 2010 & 2013 on the file open window.
Microsoft definition
http://msdn.microsoft.com/en-us/library/windows/desktop/dd940505(v=vs.85).aspx
thanks anyway
Dear All,
I have created my own CSS and also I am using some images for my application. I have put everything under webcontent folder as shown below.
Webcontent
myCSS
custom.css
myImages
comp_logo.gif
I have also add following in my APP:
For CSS:
includes: [ "myCSS/custom.css" ] - at my component level
<link href="stylesheet" type="text/css" src="myCSS/custom.css"
For images:
<images src="myImages/comp_logo.gif">
If I am running my application stand alone (without launchpad) then everything is working fine. But If I am running my application in FIORI launchpad then it is showing error that above files are not found.
CSS not found under /resources/myCSS/custom.css
Image to found under /ushells/ABAP/myImages/comp_logo.gif
Could anyone please help on this.
Regards,
Bhavin
I completed my btech in 2013 and I wanted to enter the sap field. Please tell me the best module and i am not very good at coding, and i dont know about modules info. please help me out here
Hi
I want to read a calc view and find a MAX of the column
For this I am writing a calc view of type "script" and using the below code. Which is not working. Any hints on this?
Or is there any other way of doing it , where the performance is better?
BEGIN
var_tab = CE_CALC_VIEW("_SYS_BIC"."pksample.productmanagement/CV_REVENUW_RECOG_CUTOFF_PVP_1",["SDS_VBELN","SDS_POSNR","TRAN_TIME"]);
var_out = CE_AGGREGATION(:var_tab,[MAX("TRAN_TIME")],["SDS_VBELN","SDS_POSNR"]);
END
Thanks.
